Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
list, and configure the following parameters:
Band
Index
SSID
Character Set
SSID Broadcast
WMM (Wi-Fi Multimedia)
Security
Fast Roaming (802.11 k/v/r)
Encryption
Key Size (for Open System)
Key Type (for Open System)
Key Value
Encryption Type
WPA Mode
Passphrase
Group Key Update Interval
RADIUS Server/Port/Secret
Select wireless frequency.
Select SSID index (Primary and SSID 1 to SSID 7). To
create a new SSID, select a new index parameter
first.
Enter the wireless network name. The SSID must be
unique for each SSID index.
Select the character set to be used in the SSID
encoding: UTF-8 or GB2312.
Enable or disable the wireless SSID visibility.
Enable or disable the Wi-Fi Multimedia that
facilitates traffic prioritization according to the
Access Category.
Select the wireless security standard: Open System
(no pre-shared key required), Enhanced Open,
Enhanced Open+ Open, WPA-Personal, WPA
Enterprise (Radius server required), and 802.1X
(Radius server required).
Enable or disable fast roaming. This function is only
available for compatible models and specific
software versions.
Enable or disable WEP Open System encryption. The
function is only available when Security is set as
Open System.
Select the WEP key size: 64 or 128 bits.
Select the WEP key type: ASCII or HEX.
Enter the open system WEP encryption key.
Depending on the key size selected, enter 10 or 26
hexadecimal characters (or 5 or 13 ASCII characters).
Select the encryption type: Auto, TKIP, or AES (the
only option available for WPA3). This option is only
available when Security is set as WPA.
Select Auto (WPA or WPA2), WPA2 or WPA3, WPA2
Only, or WPA3 Only.
Enter an alphanumeric passphrase. The function is
only available when Security is set as WPA-Personal.
Enter the WPA group key update interval in seconds.
Enter the RADIUS server's IP address. The function
56
AP Network
Advertisement
Table of Contents
