Nuclias Connect Hub Plus User Manual
Choose From the Server as the Update Method and configure the following:
Current Firmware Version
New Firmware
Auto Update
Click Save to save the values and update the screen.
Or choose From a Local storage and perform the manual update:
Firmware File
Update
Note: The firmware update will update the firmware for all 3 modules of the Hub. During a
firmware update, do not power off or reset the device or interrupt the process in any way,
until the operation is complete. Interrupting the update process may corrupt the Hub and
require further RMA services.
System Operation
The System Operation page provides you with maintenance functions such as reboot,
restore to factory defaults, and hard disk formatting.
Displays the current firmware version
Click Check to verify if the current firmware is up to
date.
The system will periodically get the latest version from
the server and update itself. If this option is enabled,
choose the desired days of a week and the time for
firmware updates.
Click Browse.... to locate the firmware file. The firmware is a bin file
type.
Click this button to start the update process immediately.
25
System Settings