Wireless Controller
Chapter 4. Monitoring Status and
4.1 System Overview
The Status page allows you to get a detailed overview of the system configuration.
The settings for the wired and wireless interfaces are displayed in the DWC-1000
Status page, and then the resulting hardware res ource and controller usage details are
summarized on the controller Dashboard.
4.1.1 Device Status
Status > Device Info > Device Status
The DWC-1000 Status page gives a summary of the controller configuration settings
configured in the Setup and Advanced menus. The sta tic hardware serial number and
current firmware version are presented in the General section. The WAN and LAN
interface information shown on this page are based on the administrator
configuration parameters. The radio band and channel settings are presente d below
along with all configured and active APs that are enabled on this controller.
Statistics
56
User Manual