Figure 56: Manual Power Adjustment Plan - D-Link DWC-1000 User Manual

Wireless Controller

Figure 56: Manual Power Adjustment Plan

Access Point Software Download
Setup > AP Management > Software Download
The wireless controller can upgrade software on the APs that it manages.
Server Address: Enter the IP address of the host where the upgrade file is
located. The host must have a TFTP server installed and running.
File Path: Enter the file path on the TFTP server where the software is located.
You may enter up to 96 characters.
File Name: Enter the name of the upgrade file. You may enter up to 32
characters, and the file extension .tar must be included.
Group Size: When you upgrade multiple APs, each AP contacts the TFTP
server to download the upgrade file. To prevent the TFTP server from being
overloaded, you can limit the number of APs to be upgraded at a time. In the
Group Size field, enter the number of APs that can be upgr aded at the same
time. When one group completes the upgrade, the next group begins the process
Image Download Type: Type of the image to be downloaded, which can be one
of the following:
• All images (img_dwl8600 and img_dwl3600/6600)
• img_dwl8600
• img_dwl3600/6600
92
User Manual