Figure 37: Ap Status - D-Link DWC-1000 User Manual

Wireless Controller
To configure an Authentication Failed AP to be managed by the controller the next
time it is discovered, select the check box next to the MAC address of the AP
and\click Manage. You will be presented with the V alid Access Point Configuration
page.

Figure 37: AP status

MAC Address:
IP Address: The network address of the access point.
Age: Shows how much time has passed since the AP was last detected and the
information was last updated.
Status Shows the access point status:.
• Managed—The AP profile configuration has been applied to the AP and it's
operating in managed mode.
• No Database Entry— MAC address of the AP does not appear in the local or
RADIUS Valid AP database.
• Authentication (Failed AP)—The AP failed to be authenticated by the controller
or RADIUS server. Since AP is not configured as a valid AP whic h the correct
local or RADIUS authentication information.
• Failed— The controller lost contact with the AP; a failed entry will remain in the
managed AP database unless you remove it. Note that a managed AP will
temporarily show a failed status during a r eset.
Shows the MAC address of the access point.
65
User Manual