Figure 41: Peer Controller Configuration Status - D-Link DWC-1000 User Manual

Wireless Controller
Peer IP Address: Shows the IP address of each peer wireless controller in the
cluster that received configuration information.
Configuration Controller IP Address: Shows the IP Address of the controller that
sent the configuration information.
Configuration: Identifies which parts of the configuration the controller received
from the peer controller.
Timestamp: Shows when the configuration was applied to the controller. The time
is displayed as UTC time and therefore only useful if the administrator has
configured each peer controller to use NTP.

Figure 41: Peer Controller Configuration Status

This page includes the following buttons:
• Refresh—Updates the page with the latest information
Peer Controller Managed AP Status
Status > Global Info > Peer Controller > Managed AP
The Peer Controller Managed AP Status page displays information about the APs
that each peer controller in the cluster manages. Use the menu above th e table to
select the peer controller with the AP information to display. Each peer controller
is identified by its IP address
MAC Address: Shows the MAC address of each AP managed by the peer
controller.
71
User Manual