Checking Wan Status - D-Link DWC-1000 User Manual

Wireless Controller
When IPv6 is PPPoE type, the following PPPoE fields are enabled.

Username: Enter the username required to log i n to the ISP.

Password: Enter the password required to login to the ISP.

Authentication Type: The type of Authentication in use by the profile: Auto -
Negotiate/PAP/CHAP/MS-CHAP/MS-CHAPv2.


Dhcpv6 Options: The mode of Dhcpv6 client that will start in this mo de:
disable dhcpv6/stateless dhcpv6/stateful dhcpv6/stateless dhcpv6 with prefix
delegation.

Primary DNS Server: Enter a valid primary DNS Server IP Address.

Secondary DNS Server: Enter a valid secondary DNS Server IP Address.
Click Save Settings to save your changes.

3.2.7 Checking WAN Status

Setup > Internet Settings > WAN1 Status
The status and summary of configured settings for both WAN1 and WAN2 are
available on the WAN Status page. You can view the following key connection
status information for each WAN port:

Connection time: The connection uptime

Connection type: Dynamic IP or Static IP

Connection state: This is whether the WAN is connected or disconnected to
an ISP. The Link State is whether the physical WAN connection in place;
the Link State can be UP (i.e. cable inserted) while the WAN Connection
State is down.

IP address / subnet mask: IP Address assigned

Gateway IP address: WAN Gateway Address
44
User Manual