D-Link DWC-1000 User Manual page 67

Wireless Controller
• Rogue—The AP has not attempted to contact the controller and the MAC address
of the AP is not in the Valid AP database.
Radio: Shows the wireless radio mode the AP is using.
Channel: Shows the operating channel for the radio.
This page includes the following buttons:
• Delete All —Manually clear all APs from the All Access Points status page
except Managed Access Points.
• Manage — Configure an Authentication Failed AP to be managed by the
controller the next time it is discovered. Select the che ck box next to the MAC
address of the AP before you click Manage You will be presented with the Valid
Access Point Configuration page. You can then configure the AP and click Submit
to save the AP in the local Valid AP database. If you use a RADIUS server for AP
validation, you must add the MAC address of the AP to the AP database on the
RADIUS server.
• Acknowledge — Identify an AP as an Acknowledged Rogue. Select the check box
next to the MAC address of the AP before you click Acknowledge. The controller
adds the AP to the Valid AP database as an Acknowledged Rogue.
• View Details — To view the details configured APs. Select the check box next to
the MAC address of the AP before you click View Details.
• Refresh—Updates the page with the latest informati on
Managed AP Status
Status > Access Point Info> Managed AP Status
In the Managed AP Status page, you can access a variety of information about
each AP that the controller manages.
66
User Manual