Routing Configuration; Routing Mode; Figure 25: Protocol Binding Setup To Associate A Service And/Or Lan Source To A Wan And/Or Destination Network - D-Link DWC-1000 User Manual

Wireless Controller
applicable when load balancing mode is enabled and more than one WAN is
configured.
Figure 25: Protocol binding se tup to associate a service and/or LAN
source to a WAN and/or destination network

3.4 Routing Configuration

Routing between the LAN and WAN will impact the way this controller handles
traffic that is received on any of its physical interfaces. The routing mo de of the
gateway is core to the behaviour of the traffic flow between the secure LAN and the
internet.

3.4.1 Routing Mode

Setup > Internet Settings > Routing Mode
This device supports classical routing, network address translation (NAT), and
transport mode routing.

With classical routing, devices on the LAN can be directly accessed from the
internet by their public IP addresses (assuming appropriate firewall settings). If
your ISP has assigned an IP address for each of the computers that you use,
select Classic Routing.
49
User Manual