1.
If modules were installed in TFIO-A, select TFIO-A Modules on the navigation tree. The TFIO
Module Setup displays
Figure 9-1: TFIO-A Modules Setup
2.
Click the TFIO Module List tab
a.
Verify all TFIO modules are connected and their type listed.
Figure 9-2: TFIO-A Module List
3.
If modules were installed in TFIO-B, select TFIO-B Modules on the navigation tree. The TFIO
Bus Enable tab displays
34 | RM C-100 | 2105551MN AD
(Figure
9-1).
(Figure
9-2):
(Figure
9-3).