Nokia 7210 Configuration Manual page 343

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
The following example shows the command usage to configure TOD-suite egress
parameters.
Example:
The following is a sample configuration output of an egress IP filter association with
filter ID 100.
sim1>config>filter# ip-filter 100 create
A:sim1>config>filter>ip-filter$ entry 10 create
A:sim1>config>filter>ip-filter>entry$
A:sim1>config>system>cron>tod-suite# egress filter ip 100
A:sim1>config>system>cron>tod-suite# info detail
----------------------------------------------
----------------------------------------------
A:sim1>config>system>cron>tod-suite#
Ingress
This command is an enhancement for specific ingress policies including filter lists
and QoS policies. Use this command to create time-range based associations of
previously created filter lists and QoS policies. Multiple policies may be included and
each must be assigned a different priority; in case time-ranges overlap, the priority
will be used to determine the prevailing policy. Only a single reference to a policy may
be included without a time-range. To configure a daily time-range across midnight,
use a combination of two entries. An entry that starts at hour zero will take over from
an entry that ends at hour 24.
Use the following syntax to configure time range based associations.
CLI Syntax:
3HE 17358 AAAB TQZZA
config>system>cron>tod-suite$ egress filter ip 100
config>system>cron>tod-suite$
no description
egress
filter ip 100
exit
config>system>cron
tod-suite tod-suite-name create
ingress
filter ip ip-filter-id [time-range time-range-
name] [priority priority]
filter ipv6 ipv6-filter-id [time-range time-
range-name]
filter mac mac-filter-id[time-range time-range-
name] [priority priority]
qos policy-id [time-range time-range-name]
[priority priority]
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
System Management
343