A/C Head Unit - Mitsubishi Electric HS-U449 Service Manual

2-8. A/C HEAD UNIT

DECK POSITION : Normal
(Removal)
1. Remove the LEAD CONNECTOR of the A/C HEAD
UNIT shown in Fig. 2-8.
2. Remove the two screws (a) fastening the A/C HEAD
UNIT shown in Fig. 2-8 to remove the A/C HEAD
UNIT.
(Installation)
1. Install the A/C HEAD UNIT shown in Fig. 2-8.
Note : Never touch the head of the A/C HEAD UNIT
shown in Fig. 2-8. Clean dirt on the head with
alcohol, if necessary.
2. Install the LEAD CONNECTOR of the A/C HEAD
UNIT shown in Fig. 2-8.
3. Perform "3-3. A/C HEAD Adjustment" and "3-4. Phase
Adjustment" of "3. Interchangeability Adjustment of
the Mechanism."
2-9. F/E HEAD
DECK POSITION : Normal
(Removal)
1. Lift the F/E HEAD shown in Fig. 2-9-1 in the direction
shown by arrow A to remove it.
Note : Be sure to replace the removed F/E HEAD with a
new one.
(Installation)
1. Install the F/E HEAD shown in Fig. 2-9-1.
Note : Never touch the head shown in Fig. 2-9-2. Clean
it with alcohol, if necessary.
a
Head
F/E HEAD
- 6 -
LEAD CONNECTOR
a
A/C HEAD UNIT
Fig. 2-8
F/E HEAD
Counter-
clockwise
Fig. 2-9-1
Head Part
Never touch the Head Part.
Fig. 2-9-2
A