Mitsubishi Electric HS-U449 Service Manual page 7

CONNECTION
Connecting separate antennas (UHF/VHF)
Connecting the Television
To connect separate UHF/VHF antennas to the VCR:
1. Disconnect the antennas from the back of your TV.
2. Connect the antenna leads to the combiner.
3. Screw or push the combiner onto the ANTENNA terminal
on the VCR labeled ANTENNA IN.
4. When you are finished, refer to "Connecting
the Television" to complete your connections.
Antenna VHF
300 Ohm Flat
Twin Lead
75 Ohm
Coaxial Cable
x
x
300 Ohm Transformer
Connecting a regular TV to the VCR
Before connecting the VCR to the TV, complete the cable or
antenna connections to the VCR. (If you have not already
done so.)
To connect a regular TV to the VCR:
1. Take the black cable that is supplied with your VCR
(called a coaxial cable) and connect it to the ANTENNA
terminal on the VCR labeled ANTENNA OUT.
2. Connect the other end of this cable to the terminal on
your TV labeled ANTENNA IN. (This terminal may also
be labeled VHF IN.) If you have an older TV without this
kind of terminal, you will have to use a splitter and then
connect the splitter to the television.
Antenna UHF
300 Ohm
Flat Twin Lead
2
x x
UHF
VHF
Combiner
Now that you've completed the antenna connections to your
VCR, you're ready to connect the VCR to the TV.
Because every television is different (especially older model
TVs), your VCR may need to be connected in a variety of
ways. See the Owner's Manual for Instruction Information
ON:
• Determining if you need a splitter,
• Connecting TVs with audio and video inputs.
3
IN
1
ANTENNA
OUT
ANTENNA OUT
VCR ANTENNA TERMINAL
TV without ANTENNA IN terminal (single antenna terminal for VHF and UHF)
UHF/VHF Splitter
From ANTENNA OUT
on VCR
- 3 -
TV ANTENNA TERMINAL
ANTENNA IN
UHF/VHF Splitter
Connect to
UHF IN on TV.
Connect to
From ANTENNA OUT
VHF IN on
on VCR
TV.
2
ANTENNA IN
Connect to
UHF IN on TV.
Connect to
VHF IN on TV.