Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 162

(From previous page)
2)
3.
4.
5.
6 - 6
6. About debug
6.2 Training screen creation
1)
2.
(Next page)
2.
Place the numerical display, and make the
settings as follows:
[Device] tab
Device: D30
Font: Outline Gothic
Number Size: 32
Digits (Integral): 2
Select [Fill with 0].
3.
Copy and paste the numerical display created in
2.
1) Device "D31"
2) Device "D32"
4.
Create characters with text.
5.
Select [Object] - [Lamp] - [Bit Lamp] from the
menu, and then click on the screen to place a
bit lamp.
Configure the following settings for the placed
bit lamp.
[Device/Style] tab
6.
Device: M34
Shape : FA Control Lamp Figure
Lamp color (when it is ON): Green
[Text] tab
Font: Outline Gothic
Text Size: 16
Display Position: Down
Text: Operating
Select OFF=ON.
6.
Copy and paste the lamp created in
make the settings as follows:
[Device/Style] tab
Device: M35
Lamp color (when it is ON): Red
[Text] tab
Text: 8 hours have elapsed
Select OFF=ON.
, and make the settings as follows:
A1:L_01_0_G
5.
, and