Checking Whether Data Has Been Properly Transferred To The Got; System Alarm - Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook

4.5 Checking whether data has been properly
transferred to the GOT
4.5.1

System alarm

The system alarm is a function used to display error codes and error messages when error occurs in the PLC, GOT,
servo amplifier, communication system, etc.
Error messages displayed in the system alarm do not need to be registered. (They are registered in GOT.)
If the system alarm is set in the screen beforehand, displaying system alarm allows a user to check how the error
occurred and its cause.
• Under normal conditions
When nothing appears in the System Alarm, communication is normal.
• When an error occurs
When an error message appears in the System Alarm, check whether there is a cable disconnection and the condition
of the PLC.
P O I NT
P O I
Error messages to be displayed in the system alarm can be checked by using the following methods besides
setting the system alarm.
[Maintenance] tab of the utility menu of the GOT
• [System alarm]
• [Batch self check]
With [Batch self check], the error message history can also be checked.
System Alarm display area
4. From GOT screen creation up to the test

4.5 Checking whether data has been properly transferred to the GOT

1
2
3
4
5
6
4 - 29