Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 60

(From previous page)
P O I NT
P O I
In the [Detail Setting] dialog box, the following contents can be set.
5.
6.
9.
4 - 12
4. From GOT screen creation up to the test
4.2 Screen creation
• [Close the window when switching base screens]
Closes the overlap window automatically without [X]
when the base screen is switched.
• [Display the title bar]
Displays a title bar on the overlap window.
• [Specify the display order]
Select a stacking order number for the overlap window.
• [Disable the touch operation of a screen on the back]
Displays the overlap window in the front regardless of the
setting of Specify the display order and disables the touch
operation on the screens behind the overlap window.
Select this item, and then select a condition for disabling
the touch operation.
4.
The device dialog box is displayed.
5.
Click
6.
Click
7.
7.
After settings are completed, click the
8.
Check that "D0" is set in the switching
device.
8.
9.
Check "Overlap Window 1" and set the
10.
switching device to enable Overlap window.
10.
Click the
Switching Device" to "D1".
11.
Click the
11.
and set to "D".
and set to "0".
button.
button and set the "Screen
button.