NEC Express5800/R120e-2M User Manual page 100

Chapter 2 Preparations
Product
Model name
name
N8104-128 10GBASE Adapter
(SFP+/2ch)
[PCI Express 2.0(x8)]
N8104-148 10GBASE Adapter
(SFP+/2ch)
[PCI Express 2.0(x8)]
N8104-131 10G Converged Network
Adapter (2ch)
(10Gbps/Optical)
[PCI Express 2.0(x8)]
N8117-01A Additional RS-232C
connector *3
√: Can be mounted, –: Cannot be mounted
Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
*1
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
100
PCIe PCIe
Slot number
3.0 #1A 3.0 #1B
PCI slot
x8 lane x4 lane
performance*1
Transfer
bandwidth
(per lane) *1
Dedicated
Slot size to RAID Full height
Controller
PCI card type x8 x16
*2 socket socket
Up to
Dedicated
Available card 220 mm
to RAID
size (or up to
Controller
312 mm)
－ －
－ －
－ －
－ －
Express5800/R120e-2M User's Guide
1. Installing Internal Optional Devices
PCIe PCIe PCIe
3.0 #2B 3.0 #1C 3.0 #2C 3.0 #3C
x8 lane x8 lane
8Gb/s
Dedicated
Low profile to RAID Full height
Controller
x8
x8 socket
socket socket
Dedicated
Up to 312 mm to RAID
Controller
－ － ○
－ － ○
－ － ○
○ ○ ○
PCIe
Remarks
x16
－
For additional LAN port.
Prepare SFP+ module
[N8104-129] if needed.
Only one card can be
－
installed in RHEL6.
Up to two cards including
N8104-136/137/128/148/131
can be installed.
－
For additional DCB/FcoE.
SFP+ module is
factory-installed.
StoragePathSavior
supports redundant path
of FC.
Teaming/bonding with
LAN is not available.
Only one port per system
can be used as LAN of
N8104-131.
Only one card can be
installed in RHEL6.
Up to two cards including
N8104-136/137/128/131 can
be installed.
－
For additional serial port B
(RS-232C).
Only one card can be
installed.