Leds For Lan Connectors - NEC Express5800/R120e-2M User Manual

Chapter 1 General Description
4.7.8

LEDs for LAN connectors

Three LAN connectors provided at the rear of the server have two LEDs each.
LINK/ACT
LED
•
LINK/ACT LED (
This LED indicates the state of the LAN port.
The following table lists LINK/ACT LED patterns.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
•
SPEED LED (
This LED indicates which network interface is used.
− Two onboard LANs (
− Management LAN (
The following table lists LINK/ACT LED patterns.
SPEED LED pattern
On (amber)
On (green)
Off
44
SPEED
LED
LAN connector
for data
transmission
1, 2, M)
The server is connected with network normally.
The server is accessing network.
The server is disconnected from network.
1, 2, M)
1, 2) support 1000BASE-T, 100BASE-TX, and 10BASE-T.
M) supports 100BASE-TX and 10BASE-T.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Express5800/R120e-2M User's Guide
SPEED
LINK/ACT
LED
LED
Management
LAN connector
Description
Description
4. Names and Functions of Parts