Specifications - NEC Express5800/R120e-2M User Manual

Hide thumbs Also See for Express5800/R120e-2M:
Table of Contents

Advertisement

Chapter 4 Appendix
1.

Specifications

Product name
N code
CPU
Clock speed
Number of CPUs,
CPU
standard/maximum
3rd cache
Number of cores (C) /
Number of threads (T)
per CPU
Chipset
Capacity,
standard/maximum
Memory module
Memory
Maximum operating
frequency
Error check, correction
Memory sparing
Memory mirroring
Internal
(standard)
Hard disk
Internal
drive
(maximum)
Hot swap
Auxiliary
storage
Interface / RAID level
Optical disk drive
FDD
Device bay
Expansion
Supported slots
slots
Chip/VideoRAM
Graphics
Graphic display /
resolution
Interface
Power supply unit
Redundant power supply
Redundant fan
External dimensions (width × depth ×
height)
Weight (Standard/ Max.)
Power
High-load state
consumption
(100V at
maximum
40°C environment
configuration)
Environmental
Operating
requirements
Temperature/Humidity
Storage
152
N8101-675F
N8101-676F
Intel ®Xeon® processor
E5-2609 v2
E5-2620 v2
2.50GHz
2.10GHz
1/2
10M
15M
4C/4T
6C/12T
Intel® C602-J chipset
Not pre-installed /Unbuffered DIMM: 64GB (16x 4GB),
Registered DIMM: 384GB (24x 16GB),
Load Reduced DIMM: 1536GB (24x 64GB)
DDR3L-1600 Unbuffered DIMM (4GB),
DDR3L-1600 Registered DIMM (2/4/8/16GB), DDR3L-1866 Registered DIMM (8/16GB),
DDR3L-1333 Load Reduced DIMM (32GB), DDR3L-1600 Load Reduced DIMM (64GB)
1333MHz
1600MHz
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Supported
Supported
HDD: SATA 16TB (16x1TB), SAS 17.2TB (16x1.2TB),
SSD: SAS 6.4TB (16x 400GB) (with optional HDD cage installed)
Supported
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Internal or external drive (option) *1
Option: Flash FDD (1.44MB) *2
3.5-inch bay x 1
1 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 312 mm in length)
2 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 220 mm in length)
(One slot is required in 2-CPU configuration.)
2 x PCI EXPRESS 3.0 (x4 lane, x8 socket) (Low profile, 220 mm in length)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to RAID Controller)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Embedded management controller chip / 32 MB
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024
9x USB 2.0 (2x front, 4x rear, x3 internal), 2x Analog RGB (Mini D-sub15-pin, 1x front, 1x rear),
1x Serial port (RS-232C compliant / D-sub 9-pin, Serial port A, 1x rear, optional port can be used (up to two
ports in total)).
2x 1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2x rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x rear)
Not preinstalled / 450W or 800W or 1200W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug
available)
(Maximum: 2) 100/200VAC±10%, 50/60Hz
Supported (option, hot-plug available)
Supported (option, hot-plug available)
When power supply unit N8181-86 (450W) or N8181-87 (800W) is selected:
448.0 mm x 735.8 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 770.8 mm x 88.0 mm (Front bezel, inner rails, projections are included)
When power supply unit N8181-88 (1000W) is selected:
448.0 mm x 770.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 805.0 mm x 88.0 mm (Front bezel, inner rails, projections are included)
20.5kg / 33kg (Rails included)
680VA/679W
680VA/679W
820VA/810W
820VA/810W
10 to 40°C / 20 to 80%,
–10~55°C / 20 to 80% (no condensation either when operating or when stored)
Express5800/R120e-2M User's Guide
Express5800/R120e-2M
N8100-2073F
N8101-677F
N8101-678F
E5-2630 v2
E5-2630L v2
2.60GHz
2.40GHz
680VA/679W
640VA/639W
820VA/810W
780VA/770W
1. Specifications
N8101-679F
N8101-680F
E5-2637 v2
E5-2640 v2
3.50GHz
2.00GHz
20M
4C/8T
8C/16T
1866MHz
1600MHz
780VA/779W
710VA/709W
920VA/910W
850VA/840W
10 to 35°C / 20
10 to 40°C / 20
to 80%,
to 80%,

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-2072fNec express5800 series

Table of Contents