Smart Eth Gateway - Huawei FusionModule1000A40 Product Description

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Indicators and Buttons
Table 3-43 User interface indicators
Indicator
RUN
ALM
Table 3-44 BLINK button description
Function
Description
Blinking

3.4.6 Smart ETH Gateway

A smart ETH gateway allows the extension of the 53.5 V DC power supply and FE
communication for the ECC800-Pro and can be flexibly deployed in a smart
module.
Issue 03 (2021-02-10)
Status Description
Steady A board application is being loaded.
on
Off The board is not running.
Blinking The ECC800-Pro is successfully registered, and the
at long software runs properly (blinking at long intervals (0.5
intervals Hz), on for 1s and then off for 1s).
Blinking The communication is interrupted or the ECC800-Pro is
at short unsuccessfully registered (blinking at 2.5 Hz, on for 0.2s
intervals and then off for 0.2s).
Blinking Blinking at super short intervals for 0.5s and then off for
0.5s; last 10s (blinking at super short intervals: 10 Hz,
on for 0.05s and then off for 0.05s)
Steady A system fault alarm is raised.
on
Off The system is normal.
Instructions
Press the button for
less than 2s.
Copyright © Huawei Technologies Co., Ltd.
Indicator Status
The RUN indicator blinks at super
short intervals for 0.5s and then off for
0.5s; last 10s (blinking at super short
intervals for 10 Hz, on for 0.05s and
then off for 0.05s).
3 Architecture
60