Optional) Heptafluoropropane Automatic Fire Extinguisher - Huawei FusionModule1000A40 Product Description

FusionModule1000A40 Prefabricated All-in-One
Data Center
Product Description (Advanced Configuration, 208
V)
Item
Capacit
y
Output loop
current limiting
The extinguishant control panel is equipped with two 12 V batteries and the required
cables.
3.5.3 (Optional) Heptafluoropropane Automatic Fire
Extinguisher
When the FusionDC1000 catches fire, a lot of smoke is generated and the
temperature rises sharply. The smoke detector and heat detector send fire alarm
signals to the extinguishant control panel, which generates an electrical actuator
start voltage to start the electrical actuator of the fire cylinder. Then the fire
cylinder valve is opened, and extinguishant is released into the protected zone.
Heptafluoropropane (HFC-227ea) is a colorless, odorless, non-conductive, and
secondary pollution-free gas extinguishant. It features cleanness, low toxicity,
good electrical insulation, high fire extinguishing efficiency, zero threat to the
ozonosphere (ODP = 0), and short residual time (ATL = 34Y).
The design and construction of the Heptafluropropane fire extinguisher comply
with BS ISO 14520-2006 and EN 12094-2003.
Issue 03 (2021-02-10)
Specifications
Number Three loops. Loops 1 and 2 respectively connect to smoke
of detectors and heat detectors. Loop 3 is reserved by default.
detectio
n loops
Number ≤ 24 PCS
of
detector
s
connect
ed to
each
loop
Output loop for the solenoid valve driver: 1 A
Output loops for other drivers: 1 A
NO TE
Copyright © Huawei Technologies Co., Ltd.
3 Architecture
77