Preparation; Accessories; Checking The Code Number; Non-Upgradeable Version - ABB C1900 Series Installation Manual

2 PREPARATION

2.1 Accessories – Fig. 2.1
Pen Capsule
1 to 4
(depending on
no. of channels)
Keys
(door lock versions only)
A – Standard Accessories
(kit contains 2 sets
of items shown)
Case-to-Panel Gasket
C1900/0149
(see below)
Note
B – Optional Accessories
Note. If panel-mounting to NEMA 4X standard is
required, a continuous bead of suitable silicon
sealant must be applied between the case flange
and the panel. Do not use the optional gasket.
Fig. 2.1 Accessories
2
Charts
(Pack of 3)
Pipe-mounting Kit
C1900/1713
Wall-mounting Kit
C1900/1712
(kit contains 4 sets
of items shown)
2.2 Checking the Code Number – Fig. 2.2

2.2.1 Non-upgradeable Version

Note. The 1901J is a basic, non-upgradeable single
pen recorder. This version is not fitted with an analog
output, relay, transmitter power supply unit or digital
inputs and no additional modules can be fitted. The full
identification code is shown below.
C1900
single pen recorder
Electrical code – standard
Option module – none
Options – none
Door lock – not fitted
Power supply – 115V AC
Modules fitted in module positions 2 to 6 – none
Special Settings – company standard
Pull handle
3 ...and open door
Fig. 2.2 Checking the Code Number
1901J A 0 0 1 1 00000 STD
Push to
1
release handle
2
to release
door...
Check code number against
6
the Data Sheet –
SS/C1900R or SS/C1900RC
4
Loosen
captive screw
5
Swing chart plate forward