Adding Decorations; Refi Lling With Dough Or Decoration Substance - Silvercrest SGP 28 A1 Operating Instructions Manual

Adding decorations

GB
Refi lling with dough or decoration substance
12
NOTE
Use the nozzles 9 exclusively for shaping creamy substances, such as
whipped cream.
The decoration substance must have a soft and creamy consistency, otherwise
it will block the nozzle 9.
Press the start button 1 only shortly to start with, to see how the substance
responds. It is possible that the substance may continue to fl ow out for a short
time.
1) Hold the biscuit shaper at a slight angle.
2) Press the start button 1.
3) As soon as the decoration substance starts to fl ow from the nozzle 9, move
the biscuit shaper in accordance with the decorative design you wish to create.
NOTE
If the pusher 6 blocks during use, it may be that the substance or the dough
is too fi rm. Remove all of the substance/dough and, if necessary, mix a little
liquid into it.
DANGER
Remove the plug of the power cord 3 from the mains socket before refi lling
the dough or decoration substance.
1) Turn the container 7 so that the arrow on the container 7 moves from the
marking to the
2) Remove the container 7 from the motor unit 4. Push the threaded rod 5
with the pusher 6 back into the motor unit 4.
NOTE
The mechanical propulsion between motor and pusher 6 is only engaged if
the container 7 is engaged in the motor unit 4. Thus if the container 7 is
removed, you can simply push the pusher 6 into the motor unit 4.
If necessary, also remove any dough residue that may have collected behind
the pusher 6.
DANGER
The motor unit 4 may NOT be submerged in water. If necessary, it can be
wiped clean with a moist cloth.
marking on the motor unit 4.
SGP 28 A1