Features - Huawei FusionModule1000A20 Product Description

FusionModule1000A20 Prefabricated All-in-One Data
Center
Product Description (380 V)

1.2 Features

The FusionModule1000A is a small-capacity prefabricated all-in-one data center that
integrates the pre-fab. module mechanical structure, power supply and distribution system,
cooling system, management system, fire extinguishing system, and integrated cabling system.
It features high security and reliability, rapid deployment, low costs, high efficiency, and
intelligent management.
Security and Reliability
⚫
⚫
⚫
⚫
⚫
⚫
⚫
⚫
Rapid Deployment
⚫
⚫
⚫
Issue 01 (2019-10-31)
The pre-fab. module is properly grounded and resists electromagnetic interference. Its
electromagnetic compatibility (EMC) meets class A requirements specified in the
CISPR22/EN55022 standard.
The data center uses International Organization for Standardization (ISO) standard 668
pre-fab. modules that provide IP65 protection (IP55 by default; IP65 available by
changing the dustproof module at the air vent) as they are assembled by industry-leading
welding technologies and well sealed to be waterproof and dustproof.
Thanks to special coating for the pre-fab. modules, the pre-fab. modules pass the
1440-hour UL salt spray test, equivalent to a service life longer than 25 years. Based on
corrosion definitions in ISO12944-2 and service life evaluation rules in ISO12944-1, a
720-hour salt spray test in the C4-high environment is equivalent to more than 15 years
of service life, and the 1440-hour salt spray test is equivalent to 25 years of service life.
The bullet-proof function can be provided for the pre-fab. modules if required. The
pre-fab. modules pass the 10 m rifle test as they are armed with 4.2 mm bullet-proof steel
plates on their sides and 2.4 mm bullet-proof steel plates on the top.
The pre-fab. modules meet the operating requirements of the ambient temperature
ranging from –20°C to +55°C.
The pre-fab. modules meet NEBS zone 3 antiseismic requirements.
The intelligent access control system and mechanical locks provide multifold security
protection and meets class 3 theftproof requirements in EN 1627–EN 1630 or other
standards.
Optional: The fire extinguishing system is reliable, clean, insulating, and
environment-friendly, and can put out a fire efficiently and safely without damaging
equipment, thereby ensuring high equipment availability. The extinguishing agent is
Heptafluoropropane. The CE version complies with the EU's CE certification.
The fire extinguishing system in standard configuration uses manual fire extinguishing.
Streamlined manufacturing, professional division of labor, and good work conditions
ensure that modules and products of the FusionModule1000A are produced efficiently
with strict quality control. The standard product manufacturing period is less than four to
six weeks.
Infrastructure equipment such as cooling equipment, power supply equipment, and racks
are factory-installed. The customer needs only to provide network cables, power cables,
and water pipes onsite for commissioning.
System commissioning is completed in factories, and therefore onsite engineering and
equipment room commissioning take less than one week.
Copyright © Huawei Technologies Co., Ltd.
1 Overview
2