Huawei FusionModule1000A20 Product Description page 58

FusionModule1000A20 Prefabricated All-in-One Data
Center
Product Description (380 V)
Figure 3-40 Smart ETH gateway
(1) PWR_IN
cascading power port
(5) 48V_OUT1
power output port
(9) BLINK button
Specifications
Table 3-26 Technical specifications of a smart ETH gateway
Item
Power input
Power output
FE port
PoE port
BLINK
button
Issue 01 (2019-10-31)
(2) FE_1 cascading
signal port
(6) 48V_OUT2
power output port
(10) Status indicator
Specifications
PWR_IN D-type power input terminal, for power cascading, input voltage
range: 45–55 V DC
⚫ PWR_OUT D-type power output terminal, for power cascading, output
voltage range: 45–55 V DC
⚫ 48V_OUT1 and 48V_OUT2, Phoenix terminal, output voltage range:
45–55 V DC
Two FE ports, RJ45 terminal with an indicator, 10/100M communication
rate, for the cascading between smart ETH gateways and the
communication with the host
Four PoE ports, RJ45 terminal with an indicator, 10/100M
communications rate, complying with IEEE802.3at
If you press the BLINK button, the RUN indicator blinks intermittently at
super short intervals (blinking at super short intervals for 0.5s and then off
for 0.5s) for 10s.
Copyright © Huawei Technologies Co., Ltd.
3 System Architecture
(3) PoE_1–2 ports (4) PoE_3–4 ports
(7) FE_2 (8) PWR_OUT
cascading signal cascading power port
port
52