Philips DL8740 Manual page 25

Problem
The battery
symbol flas
hes on the
display.
The display
shows Err0
The display
shows Err2
The display
shows Err3
Explanation of symbols
The warning signs and symbols are essential to en
sure that you use this product safely and correctly
and to protect you and others from injury. Below
you find the meaning of the warning signs and sym
bols on the label and in the user manual.
Symbol for 'follow instructions for use'.
This symbol means that the part of the de
vice that comes into physical contact with
the user (also known as the applied part)
is of type BF (Body Floating) according to
IEC 60601-1.
Symbol for 'the device complies with Euro
pean Medical Device Directive 93/42/EEC
requirements'. 0344 refers to the notified
body.
Symbol for WEEE, waste electrical and
electronical equipment. Electrical waste
products should not be disposed of with
household waste. Please recycle where fa
cilities exist. Check with your local authori
ty or retailer for recycling advice and see
chapter 'Battery recycling'.
This symbol means that this product con
tains batteries which shall not be disposed
of with normal household waste
(2006/66/EC).
Indicates the manufacturer, as defined in
EU Directives 93/42/EEC.
Symbol for the 'Bluetooth Combination
mark'. The device uses Bluetooth for com
munication.
Indicates the manufacturer's serial num
ber so that a specific medical device can
be identified.
Symbol for indoor use only.
Indicates caution.The user should consult
the instructions for use for important cau
tionary information such as warnings and
precautions that cannot, for a variety of re
asons, be presented on the medical devi
ce itself.
This symbol on the device means: protec
ted against access to hazardous parts with
a finger and against vertically falling water
drops when tilted up to 15 degrees.
Indicates the storage and transportation
60ºC
temperature limits to which the medical
–20ºC
device can be safely exposed: -20°C to
60°C.
Symbol for the 2 year Philips guarantee.
The Green Dot ('Der Grüne Punkt' in Ger
man) is the license symbol of a European
network of industry-funded systems for re
cycling the packaging materials of consu
mer goods.
Electromagnetic emissions and
immunity
The device is approved according to EMC safety
standard EN 60601-1-2. It is designed to be used in
typical domestic environments.
EMC Guidance
- The ear thermometer needs special precautions
regarding EMC and needs to be installed and
put into service according to the EMC informati
on provided in this document.
- Wireless communications equipment such as wi
reless home network devices, mobile phones,
cordless telephones and their base stations, wal
kie-talkies can affect this equipment and
should be kept at least a distance d = 3.3 m
away from the equipment.
Note: As indicated in IEC 60601-1-2:2007 for ME
equipment, a typical cell phone with a maximum
output power of 2 W yields d = 3.3 m at an immuni
ty level of 3V/m.
Guidance and manufacturer's declara
tion – electromagnetic emissions - for
all ME equipment and ME systems
Guidance and manufacturer's declaration – electro
magnetic emissions
The device is intended for use in the electromagne
tic environment specified below. The customer or
the user of the device should assure that it is used
in such an environment.
Possible cau
se
You have
held the devi
ce in your
hand too
long.
The batteries
are empty.
Self-test er
ror
Stabilization
error
Battery level
low
Solution
Put the device on
the table in the
room where the
measurement is ta
king place and let
it cool down first.
Replace the em
pty batteries with
new ones.
Remove and re
place the batte
ries. If the error
persists, contact
Philips Consumer
Care Center in
your country .
Wait 30 minutes
and measure
again.
Replace the em
pty batteries with
new ones.