Compliance With Standards; Battery Status Indications - Philips DL8740 Manual

- Do not put the device in a wet ear canal after
swimming or bathing. This may cause injury to
the ear canal.
- Do not use the device if it is broken or dama
ged. Using a broken or damaged device may
cause injury.
Caution
- Only use the device as described in this user
manual. Do not use it for any other purpose.
- The device is not intended as a substitute for
consulting a doctor. Measurement results are
for reference only.
- When the device is used to measure the tempe
rature of a child, it has to be operated by an
adult.
- If you clean the ear, wait 5-10 minutes before
you use the device.
- Earwax in the ear canal may cause inaccurate
measurements. Make sure the ear canal is clean
before you use the device.
- Do not take apart, repair or change any part of
the device at any time.
- Do not store the device in extreme temperature
(below -20°C/-4°F or over 60°C/140°F) or in
extreme levels of humidity (below 15%RH or
over 85%RH). This may cause inaccurate mea
surements.
- Keep the infrared sensor dry, clean and unda
maged to ensure accurate measurements.
- Do not touch or blow at the infrared sensor. A
polluted infrared sensor may cause inaccurate
measurements.
- Never clean the device with an abrasive clea
ner, thinner, benzene or immerse the device in
water or other liquids.
- When the temperature of the storage area dif
fers from the temperature of the measuring
area, wait at least 30 minutes before you use
the device.
- If you do not intend to use the device for a long
period of time, it is advised to remove the batte
ries before storing. This is to prevent possible
damage due to leakage of the batteries. If the
batteries leak, remove them carefully and repla
ce with new batteries.

Compliance with standards

- The device meets the relevant standards for this
type of Class IIa medical device for home use.
- This Philips device complies with all applicable
standards and regulations regarding exposure
to electromagnetic fields and complies with EN
60601-1-2
Display
Sym Description
bol
History icon
Bluetooth®
icon
Battery sym
bol

Battery status indications

Battery full
To indicate that the battery is fully charged the bat
tery symbol shows a full battery (Fig. 3).
Battery low
To indicate that the battery is low, the battery sym
bol shows a nearly empty battery (Fig. 4).
Preparing for use
The batteries (2x 1.5V AAA) are included with the
device. Remove the battery strip from the battery
compartment before first use.
Pairing the thermometer to your mobi
le device
Your Philips ear thermometer is equipped with
Bluetooth® Smart. Download the Philips HealthSui
te health app from the App Store or Google Play.
Use the search term: Philips HealthSuite health
app. The Philips health app is available for iOS
8.0+ and Android 4.4+.
1 Download the Philips health app on your mobi
le device, start the Setup wizard and follow the
steps to create a user profile and add the ther
mometer.
2 Make sure the Philips health app is active and
Bluetooth on your mobile device is on when pai
ring is in progress.
3 Press the power button once, to switch on the
thermometer (Fig. 5).
- The app identifies the thermometer and
requests to pair.
- The Bluetooth icon lights up when the thermo
meter is connected to your mobile device.
4 The thermometer switches off automatically
after 30 seconds of no activity.
- When the thermometer has paired successfully
with your mobile device, your personal mea
surement results are automatically transmitted
to your mobile device via Bluetooth.
Note: Only when the Philips HealthSuite health
app is active, your personal health data can be
transmitted.
Cleaning the infrared sensor
To achieve accurate measurements, it is important
to check if the infrared sensor is clean. Use a cot
ton swab to clean the infrared sensor.
See chapter Cleaning and storage for instructions.
After cleaning, wait approximately 5-10 minutes
before you use the device.
Cleaning the ear
Earwax in the ear canal may cause inaccurate mea
surements. Make sure the ear canal is clean before
you use the device.
Carefully clean your ear canal. If you clean your
ear, wait for 5-10 minutes before you use the devi
ce.
Explanation
Display shows last mea
surement result when
switching on the device.
The device uses
Bluetooth® for communi
cation.
Battery symbol indica
ting status of battery.