Fujitsu Scan Partner 300C Instruction Manual page 64

Table of Contents

Advertisement

Sense key: X'5' (ILLEGAL REQUEST)
(I) Bit per pixel: Byte 1A
Specifies the number of bits per pixel. This value shall be X'Ol', X'04' and X'08' for this scanner. For an:
value, this scanner returns the following error:
• Status: B'00001' (CHECK CONDITION)
• Sense key: X'5' (ILLEGAL REQUEST)
Halftone
(m)
pattern: Bytes lB to
Specifies the dithered pattern used in binarizing multibit multivalued image data. This scanner validates
this field only with the selection of dither/half-tone monochrome or mixed mode processing. For other
selections, this field is ignored. The values are specified in the following format:
• Byte IB: Reserved
• Byte IC
7
6
This scanner has four types (X'00' to X'03') of built-in pattern. If a value greater than the four range is
specified, this scanner returns the following error:
• Status: B'00001' (CHECK CONDITION)
• Sense key: X'5' (ILLEGAL REQUEST)
(n) RIF (reverse image format):
This scanner does not support RIF. If a value other than X'O' is specified, this scanner returns the
following errors:
• Status: B'00001' (CHECK CONDITION)
• Sense key: X'5' (ILLEGAL REQUEST)
(o) Padding type: Byte 1D, bits 0 to 2
This scanner does not support Padding type. If a value other than
the following error:
• Status: B'0000l' (CHECK CONDITION)
• Sense key: X'5' (ILLEGAL REQUEST)
ordering:
(p) Bit
Bytes
1C
(lB reserved)
5
4
3
2
this bit is reserved
bit 7
Byte 1D,
1E
1F
to
1
0
Half-tone pattern number
X'000'
4-38
is specified, this scanner returns

Advertisement

Table of Contents
loading

Table of Contents