Saving A Scheduled Event - Epson PowerLite G5910 User Manual

Note: A memory name that is being used is indicated by a green mark. Saving over a previously
saved memory overwrites the settings with your current settings.
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
Parent topic:

Saving a Scheduled Event

You can save a projector command such as turning the projector on or off, or switching input sources, as
an "event" to the projector's schedule and have the projector automatically execute the command at the
scheduled time.
Note: The Time/Schedule Protection setting in the Password Protection menu must be turned off to
schedule an event.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Schedule Settings setting and press Enter.
The Schedule Settings screen appears.
4. Select the Schedule menu and press Enter.
5. Select Add New and press Enter.
6. In the Event Settings section, select the events you want to have occur. (Select No Change for
events that you do not want to occur.)
7. In the Date/Time Settings section, set the date and time for the scheduled events to occur.
8. When you are finished, select Save and press Enter.
9. To schedule more events, repeat the previous 4 steps.
10. Select Setup complete and select Yes to save your changes.
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Adjusting Projector Features
Adjusting Projector Features
115