Epson PowerLite G5910 User Manual page 155

Power light Lamp
light
On Off
On Off
Red Off
On Flashing
orange
Red Off
Red or flashing Flashing
red red
Red Off
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Temperature Filter light Status and solution
light
Off Flashing
orange
Off Orange
Off Red
Off Off
Flashing red Off
Flashing red Off
Off Flashing
red
155
Low air flow through the projector.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the
projector and contact Epson for help.
No air filter. Check to see if the air filter is
securely installed.
Low air flow through the air filter.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the
projector and contact Epson for help.
The lamp is past its replacement period and
needs to be replaced to avoid damage. Do
not continue using the projector.
A fan or sensor has a problem. Turn the
projector off, unplug it, and contact Epson
for help.
Internal projector error or air exhaust vent
error. Turn the projector off, unplug it, and
contact Epson for help.
The air flow sensor has a problem. Turn the
projector off, unplug it, and contact Epson
for help.