Top menu
Image
Signal
Settings
Extended
Parent topic:
Adjusting the Image Position Using Lens Shift
If the projector cannot be installed directly in front of the screen, you can adjust the position of the
projected image using the lens shift feature.
Note: Wait 30 minutes after turning on the projector before setting the focus, zoom, and lens shift for
maximum accuracy.
1. Turn on the projector and display an image.
Displaying a Test Pattern
Submenu/Option
Color Mode
Abs. Color Temp.
Advanced
• Gamma
• RGB
• RGBCMY
Reset
Auto Setup
Geometric Correction
Multi-Projection
• Multi-screen
• Projector ID
76