Table of Contents
Advertisement
Event ID code
0893
0894
0898
0899
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset
Lamp Hours option, or reset the saved names and settings in the Save Memory list using the Reset
Memory option.
You cannot reset the following settings using the Reset All option:
• Input Signal
Cause and solution
The WEP/TKIP/AES encryption type does not match. Make sure the wireless
network security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCP setting in the Network menus.
Communication error. Restart the EasyMP Network Projection program.
Projector Information Display - Info Menu
135
Advertisement
Table of Contents
