Epson PowerLite G5910 User Manual page 154

Power light Lamp
light
Flashing red Off
Red Off
Red Flashing
red
On Off
Temperature Filter light Status and solution
light
Flashing Off
orange
Red Off
Off Off
Off Flashing
green
154
Projector is too hot.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• Make sure the environmental temperature
is not too hot.
Projector has overheated and turned off.
Leave it turned off to cool down for five
minutes.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Clean or replace the air filter.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If the problem persists, unplug the
projector and contact Epson for help.
Lamp has a problem.
• Check to see if the lamp is burned out,
broken, or installed incorrectly. Reseat or
replace the lamp as necessary.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If the problem persists, unplug the
projector and contact Epson for help.
It is time to clean the air filter.