Two power supply modules are required for redundancy. Each power supply can
be connected to a separate circuit to mitigate the risk of down‐time during a
localized power failure. When used in a redundant configuration, the dual power
supplies have a load‐sharing capability that enables each power supply to operate
at approximately 50 percent of full load.
Using redundant power can minimize the power disruption during a power supply
failure and extend the expected lifetime of each power supply by operating
normally in a conservative power mode.
For proper airflow when operating the switch with only one power supply module,
the empty power supply bay must be protected by a blank cover module.
29
© Copyright Lenovo 2017
Chapter 2: Switch Components