Lenovo RackSwitch G8264 Installation Manual page 43

7.Attach the filler plate (Item 9) and rear mounting brackets to the rear rack posts with M6 screws (Item
3), washers (Item 10), and either clip nuts (Item 4) or cage nuts (Item 5). Torque the screws to
approximately 5.7 Nm ± 0.1 Nm (50 inch‐pounds).
5
9
3
10
8.Secure the rear brackets to the front brackets with M3.5 screws (Item 6). Torque the screws to
approximately 0.5 Nm (4 inch‐pounds).
1
6
7 8
9.If installing the 1U air‐duct option, see the instruction on page 47.
36.
10.Connect all external cables in accordance with the "Cabling Guidelines" on page
11.Initialize the switch. See Chapter 5, "Initializing the G8264," on page 75.
12.If the switch is a replacement unit, set Vital Product Data (see "Configuring Vital Product Data" on
page 72).
43
© Copyright Lenovo 2017 Chapter 3: Installing G8264 Hardware and Options