Installing The G8264 In A Lenovo System X Or Power Rack - Lenovo RackSwitch G8264 Installation Manual

4.Secure the switch unit to the rack posts with M6 screws (Item 3), washers (Item 6), and either clip nuts
(Item 4) or cage nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50 inch‐pounds).
3
5.If installing the 1U air‐duct option, see the instruction on page
6.Connect all external cables in accordance with the "Cabling Guidelines" on page
7.Initialize the switch. See Chapter 5, "Initializing the G8264," on page
8.If the switch is a replacement unit, set Vital Product Data (see "Configuring Vital Product Data" on
page 72).

Installing the G8264 in a Lenovo System x or Power Rack

© Copyright Lenovo 2017
6
This section describes how to install the G8264 in a Lenovo System x
4‐post rack, using the Lenovo Adjustable 19" 4‐Post Rail Kit.
This kit must be purchased separately. It includes the following parts:
Table 11.
Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number Description
1 Switch front bracket
2 M4 screws
3 M6 screws
4 M6 clip nuts
5 M6 cage nuts
6 M3.5 screws
7 Rear mounting bracket
8 Rear mounting bracket with cord exit
9 Filler plate
10 M6 locking washers
4
47.
Chapter 3: Installing G8264 Hardware and Options
36.
75.
®
or Power
Quantity
2
16
8
8
8
4
1
1
1
8
39