Operator Seat And Seat Belt - Toro 25450 Operator's Manual

Traction unit
Hide thumbs Also See for 25450:
Table of Contents

Advertisement

Move the joystick rearward to start the vibration of the
plow blade
(Figure
15).
Move the joystick further rearward to increase the
vibration
(Figure
15).
Move the joystick toward the Neutral position to decrease
and stop the vibration
Trencher
Move the joystick forward to start the digging chain in the
forward direction
(Figure
Move the joystick further forward to increase the chain
speed
(Figure
15).
Move the joystick to the Neutral position to stop the
trencher chain
(Figure
Attachment-Elevation Switch
The attachment-elevation switch raises and lowers an
attachment mounted at the rear of the machine.
Press the switch on the left to lower the attachment boom
(Figure
15).
Press the switch on the right to raise the attachment
boom
(Figure
15).
Auxiliary-Control Panel
The auxiliary-control panel includes the rocker switch that
controls the machine tilt actuator
has locations for rocker switches that are installed with the
optional attachments or kits for the machine.
(Figure
15).
15).
15).
(Figure
16). The panel also
1. Machine tilt—left/right
2. Auto tilt On/Off (reserved
for an optional kit)
3. Sideshift left/right
(reserved for an optional
attachment)
4. Lower/raise the
crumber/rotate the plow
forward (reserved for an
optional attachment)
5. Lower/raise the rock saw
stabilizers (reserved for an
optional attachment)

Operator Seat and Seat Belt

Seat-Interlock System
WARNING
The seat-interlock system protects the operator
from injury.
Do not disable the seat-interlock system.
The seat-interlock system requires the operator to sit in the
operator seat while operating this machine.
Note: The neutral-indicator light turns on when you
turn the key switch to the On position and both the
utility-traction-control and attachment-control levers are in
the Neutral position.
Note: If the operator does not remain seated when the
utility-traction lever is not in the Neutral position, the engine
will stop in 1 second. Do not lay a heavy object on the seat or
tamper with the seat-interlock system in any way.
20
Figure 16
6. Auxiliary hydraulic
(reserved for an optional
attachment)
7. Vibratory plow boom float
On/Off (reserved for an
optional attachment)
8. Vibratory plow swing float
On/Off (reserved for an
optional attachment)
9. Trencher speed Fast/Slow
(reserved for an optional
attachment)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt1200

Table of Contents