Reset Configuration And Reboot Confirmation Pop-Up - Motorola PTP 300 series User Manual

Figure 40 Reset Configuration and Reboot Confirmation Pop-up
On confirmation the PTP 300 Series Bridge will:
Upload the configuration file
Perform data integrity checking
Erase previous configuration
Apply the new configuration
Restart
After the unit has restarted the entire configuration from the configuration file will now be active.
Note: The IP address of the unit may have also been changed. The user can check the new IP
address by reading the header of the configuration file,
CAUTION: A reboot is always required to restore a configuration file.
Web Page Reference
Figure
78
38.