Graphical Install; Graphical Installation Screen - Motorola PTP 300 series User Manual

power is used (Region Code of 1 and power of 27 dBm). The unit shows that the Transmit Power
has been reduced to the lower operating power band.
The screen presents hyperlinks to the main configuration and spectrum management pages.
After installation the system administrator may wish to modify the wireless units descriptive con-
figuration (link name and link location). In addition the system administrator may wish to change
the spectrum management configuration of the wireless unit, or look at the analysis of the 5.8 GHz
spectrum to see if the automatic channel selection is appropriate for the system administrator's
network. It is also recommended that a backup copy of the wireless units configuration is taken.
Hyperlinks are provided on the post disarm page for ease of use.

8.3.5 Graphical Install

To aid the installation of wireless links two graphical installation aids have been introduced in this
300 Series system version.
A PDA installation screen
A larger installation screen available from the main HTTP management interface.
The design of the installation screen has been deliberately kept simple and uncluttered. An example
of the installation screen is shown in
screen have the same content and only differ in size. The PDA installation screen is 232 by 220
pixels to be compatible with the typical size of a PDA screen.
Web Page Reference
Figure 51 Optional Post Disarm Configuration 2
Figure
Figure 52 Graphical Installation Screen
52. Both the PDA and the large format installation
92