License Key Data Entry - Motorola PTP 300 series User Manual

8.3.4.1 Manually Configuring The Wireless Units
If the installer / system administrator wishes, they may modify the default installation configu-
ration. If only the IP addresses (network configuration) are incorrect it is recommended that the
values are changed via the configuration menu
any other parameters require modification then it is recommended that the system administrator
use the Installation Wizard.
A detailed description of the Installation Wizard follows: The 300 Series bridge operational software
requires a license key to enable the wireless bridging capability and programs region code specific
parameters in to the unit.
A license key is programmed into each unit during production and can be found written on the
Configuration Data Summary Label which is attached to the Quick Install Guide. If subsequently
the license key has been mislaid, replacement keys can be applied for online or via your distributor.
If a valid license key is not detected in the unit's non-volatile memory then the user is prompted
to enter a valid key. It should be noted that 300 Series bridge units are shipped as link pairs and,
as such, valid license keys are entered during the production process. To enter a license key simply
type or paste the license key into the data entry box
key' button.
Web Page Reference
(Section 8.3.1.2
Figure 43 License Key Data Entry
85
"LAN Configuration Page"). If
(Figure 43) and click the 'validate license