Table of Contents
Advertisement
Motor Controls
The following motor controls are found on all models:
1
1. Thermal-overload
protector reset button
2. O
/O
switch
N
FF
Motor O
/O
Switch
N
FF
The O
/O
switch
(Figure
N
FF
machine to start and stop the motor. This switch is located on
the front of the motor. It is marked (O
the O
/O
switch to the O
N
FF
motor. Rotate the O
/O
N
stop the motor.
Specifications
Note: Specifications and design are subject to change without notice.
Machine Specifications
Model
Batch Capacity
Total Volume
Length
(without tow pole)
Width
Height
Weight
Axle
Motor
G022280
Figure 11
3. Power cord
12) allows the operator of the
) and (O
N
FF
position to start and run the
N
switch to the O
position to
FF
FF
60212
0.17 cubic m (6.0 cubic ft)
0.20 cubic m (7.1 cubic ft)
150 cm (59 inches)
86 cm (34 inches)
142 cm (56 inches)
250 kg (550 lb)
86 to 117 cm (34 to 46 inches)
extendable
1.5 hp Baldor Electric
2
3
1. Motor O
). Rotate
60218
0.23 cubic m (8.0 cubic ft)
0.25 cubic m (9.0 cubic ft)
168 cm (66 inches)
86 cm (34 inches)
142 cm (56 inches)
275 kg (605 lb)
86 to 117 cm (34 to 46 inches)
extendable
1.5 hp Baldor Electric
11
Figure 12
/O
switch
N
FF
60219
0.23 cubic m (8.0 cubic ft)
0.25 cubic m (9.0 cubic ft)
168 cm (66 inches)
86 cm (34 inches)
142 cm (56 inches)
275 kg (605 lb)
86 to 117 cm (34 to 46 inches)
extendable
2 hp Baldor Electric
1
g020669
Advertisement
Table of Contents
