Storage
Storing the Machine
For storage over 30 days, prepare the machine as follows:
1. Move the O
/O
N
FF
unplug the power cord.
2. Remove dirt and grime from the external parts of the
entire machine, especially the motor.
Important: You can wash the machine with mild
detergent and water.
3. Grease the machine; refer to
and Seals (page 23)
(page
24).
4. Check and tighten all bolts, nuts, and screws. Repair or
replace any part that is damaged.
5. Paint all scratched or bare metal surfaces with paint
from your Authorized Toro Dealer.
6. Store the machine in a clean, dry garage or storage area.
7. Cover the machine to protect it and keep it clean.
switch to the O
position, and
FF
Lubricating the Bearings
and
Lubricating the Drive Chain
32