Technical Data; Operating Parameters - Beko BEKOMAT 16 CO Original Installation And Operation Manual

BEKOMAT ® 16 CO

4. Technical data

4.1 Operating parameters

BEKOMAT
®
Min. / max. operating pressure
Min./max. operating temperature
Min./max. ambient temperature:
Min./max. ambient air humidity
Condensate inlet
Condensate discharge
Media
Empty weight
Operating voltage
Power consumption
Fuse protection
Recommended cable diameter
Recommended wire cross-section
(voltage supply)
Recommended shortening of the
cable jacket
Recommended stripping length of
the cable wires
Connection data potential-free
contact for switching load
Degree of protection
Overvoltage category
Degree of pollution
14 | 60
10 ... 80 %, non-condensing
2 x G3/4 (internal thread) + 1 x G1 (internal thread)
2 x 3/4" NPT (internal thread) + 1 x 1" NPT (internal thread)
G1/2 (internal thread)
Condensate, oil-contaminated and oil-free
230 / 115 /... / 24 VAC ± 10%, 50 ... 60 Hz / 24 VDC ± 10%
recommended for AC: 1 A (time-lag) | prescribed for DC: 1 A (time-lag)
3 x 0.75 ... 1.5 mm²
AC: max. 250 V / 1A | DC: max. 30 V / 1A
Original installation and operation manual
16 CO
0.8 ... 16 bar(g)
12 ... 230 psi(g)
+1 ... +60 °C
+34 ... +140 °F
+1 ... +60 °C
+34 ... +140 °F
5.90 kg
13.0 lbs
See type plate
P < 8.0 VA (W)
5.8 ... 8.5 mm
0.23 ... 0.34 inch
AWG 16 ... 18
PE= ~ 60 mm
~ 2.3 inch
L|N= ~ 50 mm
~ 1.96 inch
~ 6 mm
~ 0.24 inch
IP65 / NEMA 13
II
3