Cleaning Work - Beko BEKOMAT 16 CO Original Installation And Operation Manual

Original installation and operation manual

10.3.2 Cleaning work

Clean the BEKOMAT using a damp (not dripping wet) cotton cloth or disposable wipe, a cleaning brush and a mild,
®
conventional cleaning agent/soap.
Spray the cleaning agent on a clean cotton cloth or disposable wipe and wipe down the entire component. Then dry
using a clean cloth or let it dry at room temperature.
Carry out the individual cleaning steps as follows:
Illustration Description / explanation
1. Clean the control-air bores using a cleaning brush Ø
max. = 2.5 mm (0.09").
2. Clean the guide bushings for the control-air pipe and
the control-air pipe itself using a cleaning brush Ø
max. = 2.5 mm (0.09").
3. Clean the membrane cap using a cleaning brush
Ø max. = 1.5 mm (0.05").
4. Wipe the membrane seat and the membrane cap down
using a clean cloth without cleaning agent.
BEKOMAT 16 CO
®
43 | 60