ABB K-MAG 10D1476 Instruction Manual page 54

10D1476 K-MAG MAGNETIC FLOWMETER INSTRUCTION MANUAL
KEY QTY
1 1 METER BODY:SEE NOTE 1
2 1 O-RING:Converter Base Seal
1
2
2
3 2/4 BOLT, Self Sealing
4 - LOCTlTE, Type 271
5 2 SCREW, Flat Hd: 1/4-20 x 1/2'
6 2 WASHER, Csk: M6
7 1 SCREW, Flat Nd:
8 1 LOCKWASHER, Csk, Ext.Tooth
9 1 BASE,Converter
10A 2 FILTER CAPACITOR ASSY (RFI), 100 pF, 120 VAC
10B 6 FILTER CAPACITOR ASSY (RFU), 1000 pF, 500 VDC
11 2 GROUND STRAP
12 2 SCREW, Pan Hd: #6-32 x 1/4"
13 2 LOCKWASHER, Ext. Tooth: #6
14 1 SEAL RING, Cover
15A 1 PRIMARY BOARD, Converter Base (CMF)
15B 1 ADAPTOR BOARD (for remote converter)
16 5 SCREW, Pan Hd: #4-40 x 1/4'
17 5 LOCKWASHER, Ext. Tooth: #4
22 1 COVER, Converter Base:
23 6 SCREW, Pen Hd: #10-32 x 3/4"
24 6 LOCKWASHER, Ext Tooth: #10
25 6 O-RING, Screw Retainer
26 1 COVER, Customer Connection Box
27 1 PC BOARD, Customer Connection Box
28 1 SEAL RING, Customer Connection Box
29 1 O-RING, Connection Box to Converter
30 2 LOCKWASHER, Ext Tooth: 1/6"
31 2 SCREW, Hex Soc Hd: 1/4-20 x 7/8"
32 1 CUSTOMER CONNECTION BOX:
33 1 PIPE PLUG: 1/2" NPT SEE NOTE 2
34 1 FITTING, PipeSEE NOTE2
35 1 GROMMETSEE NOTE 2
36 1 FITTING,PipeSEE NOTE 2
37 2 GASKET,See TABLE 7-3
NOTES:
1. Meter body (Key 1) is a welded assembly end is not a repairable item. The manufacturer maintains a repair/exchange
program so that the entire meter or the Signal Converter alone, can be replaced with a minimum of down time; contact
your local factory field office for details. To order specify either a new or repair/exchange meter or Signal Converter, as
required. ALL correspondence should reference the complete instrument model number and serial number.
2. Parts are supplied with signal cable, when specified.
3. Mounting hardware and gaskets (supplied by the manufacturer) are selected according to meter size.
4. The Primary CMF Board is not interchangeable, see procedure 6.3.3 in MAINTENANCE section. It is suggested that
the user return the Magnetic Flowmeter to the factory for repair and calibration, or consult a factory service representative
for assistance.
TABLE 7-4. BASIC METER PARTS (REF: FIGURE 7-1)
DESCRIPTION
#8-32 x 1/4"
#10-32 x 5/16"
#8
#10
w/o Window
with Window
SIZE, mm PART NUMBER
N/A
3 - 25 101A927U01
40 - 50 101A937U01
80 101A922U01
100 101A927U01
091B022U01
145A016U02
032B008T10
85G027KU05
3 - 25 002K004T10
40 - 50 002L005T10
3 - 25 085M008V11
40 - 50 085M010V11
3 - 25 610B249U03
40 - 50 610B249U04
80 610B249U05
100 610B249U06
C160C102U01
160C055U01
355A422U01
006H004T10
085H006V11
101A834U01
686B623U01
686B630U01
006H004T10
085H004V11
379D358U01
D612A083U01
006L012T10
085D010T10
333C596U01
C379D371U01
C686B624U01
101A825U01
101A001U08
085H416T10
038B014T10
C323D416U02
112A352U22
364D297U01
368D145R90
364D257U01
7-3