Fujitsu 565Tx User Manual page 35

S e c t i o n T w o
11. Click on the automatic insertion notifica-
tion box to toggle it Off.
12. Click on OK.
13. Click on OK in the System Properties
dialogue box.
14. Restart your notebook according to the
message displayed.
You can re - en a ble the functi on by repe a ting
the process except in step 11 ch a n ge the
s et ting to On.
C A U T I O N
If you switch off power using the power
switch or operate the Suspend/Resume
button while any of the Access indicators
are on you may cause data to be lost
and/or a system error to occur.
22
Hard Drive Access Indicator
The Hard Drive Access indicator tells you
when either the internal hard drive or the
optional second hard drive is being accessed.
There is, however, no indicator to tell which
one is in use.
Floppy Disk Drive Access Indicator
The Floppy Disk Drive Access indicator tells
you a floppy disk is being accessed.
PC Card Access Indicators
The PC Card Access indicator tells you an
installed PC Card is being accessed. Card 0 is
the bottom connector and Card 1 is the up per
connector in the card slot. Type III cards are
always Card 0 only.
P O I N T
Windows ® 95 displays of PC Card slot
numbers may be different than the
Status Indicator slot numbers.
Num Lk Indicator
The Num Lk indicator tells you the internal
keyboard is set in ten-key numeric mode. (See
page 32 for more information on the Numeric
Keypad.) You can activate the Num Lk mode by
pressing the Scr Lk/Num Lk key while holding
down the Shift key. Deactivate the mode the
same way that you activated it. This indicator is
inactive if you are using an external keyboard.
CapsLock Indicator
The CapsLock indicator tells you when the
keyboard is set for all capital letters. Activate
the CapsLock mode by pressing the CapsLock
key on the keyboard. Deactivate the mode the
same way that you activated it. This indicator is
inactive if you are using an external keyboard.
Scr Lk Indicator
The Scr Lk indicator tells you when scroll lock
is active. You can activate or deactivate the
scroll lock by pressing the Scr Lk/Num Lk key.
Deactivate the scroll lock the same way that you
activated it. This indicator is inactive if you are
using an external keyboard.