Fujitsu FI-4860C2 Operator's Manual page 219

3. Setting Pick Speed
1) Press (Next button) or
<Screen3>.
2) At <Screen3>, press
select Pick roller rotation speed.
The blinking item is the one selected.
HINT
3) Press (Enter button) to confirm the setting.
Press (Exit button) at the end and the LCD display goes back to [Ready]
screen.
Pick roller rotation speed should be set Slow for scanning thin or soft docu-
ments, these documents tend to cause a Mis-pick to occur.
HINT
Picking speed
Fast (Factory default)
Mid
Slow
When the Pick speed is set at "Mid" or "Slow", the scanner will slow down.
HINT
(Previous button) and let the scanner show
<Screen3>
! 0 3 P i
= F a s t
(Left arrow button) or
When Mis-pick occurs frequently
Decreases the Pick speed
c k S p e e
l
/ M i d / S
(Right arrow button) and
7.3 Setup Mode Details
d
o w
7
7-19