Fujitsu FI-4860C2 Operator's Manual page 254

4) At <Screen24-1>, press
select the setting you want to give priority.
Pressing
Pressing
Press
Press
screen.
ATTENTION
7-54
7.3 Setup Mode Details
(Left arrow button) or
(Left arrow button):
(Right arrow button): "Panel: Pre" or "Panel: Post" blinks and
(Enter button) to confirm the setting.
(Exit button) and the LCD display goes back to the [Ready]
This screen is displayed only when both imprinters (fi-486PRFR and
fi-486PRRE) are installed.
(right arrow button), and
"I/F" blinks and the scanner forcibly
follows the settings done on the
interface.
the scanner forcibly follows the settings
done on the operator panel.