Fujitsu FI-4860C2 Operator's Manual page 274

(3)At <Screen50-2>, select the third item from left, [BW] in the sample
screen, and press
<Screen50-2.3>.
In this screen, press
and select the scan mode: binary (BW) or color (COLOR).
Press
back to <Screen50-2>.
(4)At <Screen50-2>, select the right most item, [200] in the sample screen,
and press
2.4>.
At this screen, press
and select scan resolution. Following parameters can be specified.
200:
240:
300:
400:
Press
back to <Screen50-2>.
(5)Press
At <Screen50-1>, select [START], and press
If fi-486PRFR and/or fi-486PRREis installed, <Screen50-3> is displayed
for setting imprinter test conditions.
If an imprinter(s) is not installed, the scanner starts scanning operations.
7-74
7.5 Test Mode Details
(Enter button). Then the LCD display shows
<Screen50-2.3>
R e
(Left arrow button) or
(Enter button) and confirm the setting.Then the display goes
(Enter button). Then the LCD display shows <Screen50-
<Screen50-2.4>
R E
(Left arrow button) or
Scan at 200 dpi
Scan at 240 dpi
Scan at 300 dpi
Scan at 400 dpi
(Enter button) and confirm the setting.Then the display goes
(Enter button). Then the display goes back to <Screen50-1>.
a d n g
i M
C O L R
O
(Right arrow button)
S O L U T I O
2 0 0
(Right arrow button)
(Start button).
d e
o
N