Fujitsu FI-4860C2 Operator's Manual page 250

21. Setting SCSI bus width
1) Press (Next button) or
<Screen21>.
2) At <Screen21>. If Wide SCSI (68pin) interface is used, press
button) and select [16].
If SCSI-2 (50pin) interface is used, press
HINT
3) Press
Press
screen.
ATTENTION
7-50
7.3 Setup Mode Details
(Previous button) and let LCD display
<Screen21>
! 2 1
= W
The blinking item is the one selected.
(Enter button) to confirm the setting.
(Exit button) at the end and the LCD display goes back to [Ready]
If 16 bit bus width data transfer is prohibited, specify 8 bit.
S C S I B
i d t h 8 /
(Left arrow button) and select [8].
u s
1 6 b i t
(Right arrow